Sure! Here is a easy-to-follow step-by-step tutorial to make the exact yarn flower in your picture.
I will break it into materials → wire making → wrapping → assembling, with tips for clean and professional results.
🌼 SUPER DETAILED TUTORIAL — Yarn Flower with Pearl Center
⭐ Materials
Use these for best results:
Yarn
- White yarn — for outer petal loops
- 5 colors of yarn:
- Pink
- Yellow
- Orange
- Purple
- Green
Tools
- Craft wire (0.8–1.0 mm thickness)
- Scissors
- Hot glue gun / fabric glue
- Pliers (optional)
- Pearl (8–10 mm)
🌿 Step 1 — Make the Petal Frames
You need 5 petals.
1. Cut the wire
- Cut 5 pieces, each about 12–15 cm long.
(Longer wire makes wrapping easier.)
2. Shape into petals
- Fold each wire piece into a loop.
- Shape into:
- Oval
- or tear-drop shape (like in the picture)
3. Secure the bottom
- Twist the two wire ends together about 1 cm.
- Trim extra wire, but leave a little tail so petals can be attached later.
4. Smooth the shape
- Use fingers or pliers to make the loop perfectly smooth.
📝 Tip:
Make all 5 loops the same size so the flower looks balanced.
🌼 Step 2 — Wrap the White Part of Each Petal
This creates the soft outer border.
1. Add glue
- Put a tiny drop of glue at the bottom of the loop.
- Press the end of your white yarn onto the glue.
2. Begin wrapping
- Wrap the yarn tightly around the wire frame.
- Keep wraps side-by-side, not overlapping.
3. Wrap the full loop
- Continue until you reach the starting point.
- Make sure the wire frame is fully covered and no metal is visible.
4. Secure the end
- Glue the end of the yarn at the bottom of the loop.
- Cut off extra yarn.
Repeat for all 5 petals.
📝 Tip:
If the yarn spaces apart, gently push the wraps together with your fingernail.
🌈 Step 3 — Create the Inner Colored Petal Fill
This is the colorful center part of each petal.
1. Choose a color for each petal
Use:
- Pink
- Yellow
- Orange
- Purple
- Green
2. Start wrapping color yarn
- Add a glue dot at the inside of the petal, near the bottom.
- Attach the colored yarn and let it dry.
3. Wrap horizontally
- Wrap the yarn across the petal from left to right, pulling firmly.
- Only wrap the center part, not the whole petal.
4. Build thickness
- Wrap 20–40 times depending on how “full” you want the petal to look.
- The shape should look like a soft, round filled petal.
5. Finish
- Glue the end of the yarn behind the petal.
- Trim neatly.
Repeat this for each petal with a different color.
📝 TIP:
To make the petal smooth, gently push all wraps to the middle so gaps disappear.
🌸 Step 4 — Assemble the Flower
1. Arrange petals
- Lay the 5 petals side by side in a round circle.
- The colored parts should face inward toward the center.
2. Join the wire stems
There are 3 ways:
Method A — Wire Twisting (Strongest)
- Twist all 5 wire ends together tightly.
- Use pliers to tighten.
Method B — Glue
- Glue each petal to the next.
- Press 5–10 seconds to secure.
Method C — Both
- Twist the wires, then add glue for extra strength.
📝 Tip:
Position petals so there is no gap between colors.
✨ Step 5 — Add the Pearl Center
1. Add glue
- Put a small dot of hot glue in the exact center of the flower.
2. Place the pearl
- Press the pearl firmly onto the glue.
- Hold for a few seconds until stable.
3. Check alignment
- Make sure the pearl is centered and not leaning.
🌼 FINISHED!
You now have a perfect yarn flower with:
✔ White loop outer petals
✔ Five colorful inner petals
✔ Pearl center
It will look exactly like the image you sent.